10″ PP Filter
- Reduces fine sediment and chlorine taste and odor in residential and commercial Drinking water
- Nominal filtration rating of 5 microns
- Bonded Pac media with polyolefin pre-filter and polyethylene netting for extended life
- Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
- Water temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
10″ PP Sediment Water Filter Cartridge (5 Micron)
The PP Sediment Filter is made of 100% polypropylene melt-blown in comparison with conventional wound filters, it has broader chemical resistance and longer life. Used preliminary for pre-purification to removing coarse particles and impurities in water such as sediment, dirt, rust, and other particles.
Specification
Media: PP Spun Cartridge
Cartridge Dimensions: Approx. 10″ x 2.5″
Fits all 10″ filter housings.
5micron used as stage 1 in most reverse osmosis systems. 1micron used as some stage 2’s on reverse osmosis systems prior to the carbon block.
1000 LPH Iron Removal Plant
100GPD Booster Pump
12X52 FRP Vessel
1500 GPD RO Water Plant
16×65 FRP Vessel
20-inch Jumbo Housing
- Ability to serve bigger flow filter usages
- Most common design where can use standard filter cartridges.
- Produce under ISO standard and 100% factory tested.
- It has used double O-ring for maximum leakage protection.
- Female thread type in-out connection has option with brass.
- Strong reinforced polypropylene design
- Accept available all kinds of cartridge